APPLICATIONS‎

Super-fine static mister especially designed for cooling and humidifying greenhouses and livestock, ‎and for irrigating over rooting tables. Netafim CoolNet Pro Foggers produce finer droplets allowing quicker evaporation resulting in higher humidity for propagation applications.

FEATURES AND BENEFITS

• Bridgeless design eliminates dripping. ‎
• Interchangeable components. ‎
• Acid resistant (AA) raw materials, thus allowing the application chemicals to pass ‎through the system. The system can be cleaned by application of suitable acid ‎treatments. ‎
• Micro sized droplets, at a relatively low pressure of 4.0 bar the CoolNet Pro™ uniformly distributes an average drop size of 65 micron.
• Specially designed for cooling, humidifying and rooting tables. ‎
• Strongly recommended to connect the CoolNet™ to the distribution pipe with a SSPE ‎‎(super soft PE) micro-tube, a specifically designed weight and AD valve (anti-drain) that ‎will prevent distribution pipe drainage. ‎

LOWER COST

Our CoolNet Pro Foggers are affordably priced — much less than high pressure fog systems.

HIGHLY UNIFORM APPLICATION

With an operating pressure range of 45 to 60 psi, these foggers produce an average droplet size of 65 microns (at 60 psi) each and every time. This creates a «blanket of fog» or zone of saturated humidity ideal for rooting. Each nozzle of the 4-Way Fogger has a flow rate of 2.0 GPH.

DEPENDABLE OPERATION

Since the CoolNet Pro Fogger operates on low pressure, there is significantly less wear on the fogger components resulting in less maintenance and reduces overall operating costs. Our fogger system requires 140 mesh filtration eliminating costly filtration systems with intensive maintenance issues. Fogger blockers are available to close off one or more nozzles of the assembly when needed.

SIMPLE INSTALLATION AND DISASSEMBLY

CoolNet Pro Foggers are readily adaptable to existing systems. They are easy to install with fittings common to most hanging assemblies. All it takes is a «twist» and the fogger nozzle can be removed from the center assembly — no tools needed.

RELIABLE CHECK VALVES

Assembled above the CoolNet Pro Fogger head is a high pressure check valve. This check valve ensures that each fogger turns on and off at exactly the same time for effective short cycling. It also prevents water from draining onto the plants or cuttings below after system shut down.